KB Home | Advanced Search | Ask Question
Home » Categories » Wireless Networking » Trouble Shooting Your Wireless Network

Changing the Wireless Channel on the BEC 7800 Modem

Make sure your computer is directly connected to your modem with an ethernet cable (the yellow cord that came with the modem) It is possible to make this change while connected to your wireless network, but could lead to some complications.

Open your internet browser and clear the address bar at the top. Type the modem's IP address, 192.168.1.254 as shown below, then 
press Enter on your keyboard


A window requesting a login will appear. Type the word admin (all lowercase) in both the username and password fields, and click OK or Login



1. Click WIRELESS on the upper left side of the screen, that will drop down more menu choices
2. Click on ADVANCED


The following page will load.
1. Click on the Channel field and choose a new channel
2. Scroll all the way to the bottom of the page and Click Apply 


You are now ready to test the new channel.
Attachments Attachments
There are no attachments for this article.
Related Articles RSS Feed
Add, Remove or Change Your Wireless Password (BEC 7300N and 7800TN modems)
Viewed 23024 times since Thu, Feb 3, 2011
Wireless Connectivity Issues
Viewed 4411 times since Thu, Dec 9, 2010
Changing the Wireless Channel on the BEC 7300 modem
Viewed 2589 times since Fri, Nov 30, 2012
Basic Wireless Troubleshooting
Viewed 3149 times since Tue, Dec 4, 2012
Four Ways to Improve Wireless Connectivity
Viewed 3072 times since Sun, Nov 27, 2011
Optimizing Your Internet Speed
Viewed 1113 times since Mon, Jan 30, 2017
Enable the Wireless Feature on Your BEC 7300N or 7800TN Modem
Viewed 12407 times since Wed, Feb 2, 2011
Keeping Your Wireless Network Secure
Viewed 2629 times since Wed, Sep 29, 2010