KB Home | Advanced Search | Ask Question
Home » Categories » Wireless Networking » FAQ

Can I disable the wireless feature on my modem?

BEC 7300N (three antenna) *If your modem has two antennas, scroll down to the BEC 7800TN guide*

Make sure your computer is directly connected to your modem with an ethernet cable (the yellow cord that came with your modem)

Open your internet browser and clear the address bar at the top. Type the modem's IP address, as shown below, then press Enter on your keyboard

A window requesting a login will appear. Type the word admin (all lowercase) in both the username and password fields, and click OK or Login

Click WLAN on the left side of the screen

Select Disable at the top as shown, then click Apply at the bottom

Click Save Config at the bottom of the screen

Click Apply

In a moment you will see the status screen. Once you are there, you can close your browser window

BEC 7800TN (two antenna)

Your computer can be connected with a cable or to the currently enabled wireless network. Follow the first two steps from the guide above.

Once you are logged into the modem, click on Wireless on the left

Click the box next to Enable to remove the check mark, then click Apply at the bottom. Once the page refreshes, you can close the browser window

Attachments Attachments
There are no attachments for this article.
Related Articles RSS Feed
Add, Remove or Change Your Wireless Password (BEC 7300N and 7800TN modems)
Viewed 22360 times since Thu, Feb 3, 2011
What is my wireless network key or password?
Viewed 19141 times since Wed, Feb 2, 2011
Why do I need wireless security?
Viewed 5864 times since Mon, Nov 28, 2011
How can I go wireless?
Viewed 3955 times since Thu, Nov 18, 2010